Comandante Red Clix RX35 Set

Comandante Red Clix Drivetrain RX35

Kit Red Clix Comandante

This new Red Clix RX35 kit has been designed for easy installation in your COMANDANTE coffee grinder.

The RX35 RED CLIX enables an expanded click range for the same particle size range and the same brewing methodology. The click steps with the RX35 combo are much finer, but at the same time, the click mechanism itself is as solid and stable as the standard version.

The RX35 Combo gives you an additional step between two standard clicks. This might be helpful if you want to optimize extraction time for a particular lightly roasted specialty coffee espresso shot.

For example: if you currently use the grinder with 5 clicks with the standard version, with the RX35 combo you should set 10 clicks.

Target Particle Resolution (typical) Horizontal Shift of targeted Particle Size (Normal Distribution Target Maximum) 15 Micron per click
Vertical Burr Pitch per Click (typical) 29 Micron
Narrow Blade Gap per Click (typical) 6 Micron

Note: Only use the special red-coloured grind dial with the RX35 axle. The extra fine precision thread on both axle and dial are very delicate and will get damaged if used with the standard axle and grind dial.

Please make sure you do not mix any RED CLIX parts with standard ones. Otherwise, the RX35 parts will get damaged and can‘t be used any more!

The RedClix Drivetrain Set makes the following improvements over our previous RedClix Set:

Two Comandante ballbearing cartridges are now included to ensure immediate installation.

We have added one more Comandante wristband (total of 2), which also fit around C40 & C60 grinders to provide extra grip.

All components are pre-assembled for easy installation.


Check out our selection of manual coffee grinders right here on MaxiCoffee!